HP-5501B - HP/Hewlett Packard - 5501B Laser Heads (Transducers)

HP/Hewlett Packard 5501B Laser Heads/Transducers

These 5501B lasers are all in very good functional and cosmetic condition, lock normally with a clean REF signal, and should meet all specifications for the 5501B. They have been tested in a monitored interferometer setup for at least 8 hours.

Sample Photos - All the lasers are in the same excellent condition.

The lasers come in the standard HP case with metal feet. Decorator colors may vary. :)

Since lasers such as the 5501B may be used in demanding aplications, the following 90 day warranty shall apply:

First 10 days: If the laser fails to meet specifications for the 5501B, buyer may opt for 100 percent refund, free repair, or replacement (if available). The laser may be returned for any other reason including that the case color doesn't match your decor for a 90 percent refund.
Next 80 days: If the laser fails to meet specifications for the 5501B, free repair or replacement will be provided, or 75 percent refund of purchase price if repair or replacement is not possible.

After 90 days, repair will be available on a time/materials basis.

Warranty void if failure resulted from improper installation, incorrect power wiring or voltages, lack of cooling, physical shock, being run over by a 10 ton truck, dropped down a flight of stairs, etc. Warranty excludes shipping.

Discount available with trade-in of your laser(s).

Return to Metrology Lasers Section or Table of Contents of Sam's Classified Page.