On very bright areas of the picture, one or more colors may bleed to
the right resulting in a trail of those colors. The difference between
this problem and the section: Trailing lines in
one or more colors is that in this case, only highlights are affected.
|NotTaR of Television Sets : Bleeding highlights
1994-2007, Samuel M. Goldwasser. All Rights Reserved. Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied: 1. This notice is included in its entirety at the beginning. 2. There is no charge except to cover the costs of copying.
I may be contacted via the Sci.Electronics.Repair FAQ (www.repairfaq.org) Email Links Page.
<< Color balance changes acr.. |
| Trailing lines in one or .. >>
One cause of this is that the color gain, contrast, or intensity controls
(whatever they are called on your set) are set too high. See the section
on: "Color balance adjustment". Check the settings of any brightness limiter
controls as well.