|
Printer and Photocopier Troubleshooting and Repair Collection : Epson Stylus Color IIS error light probl..
Copyright ©
1994-2007, Samuel M. Goldwasser. All Rights Reserved. Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied: 1. This notice is included in its entirety at the beginning. 2. There is no charge except to cover the costs of copying.
I may be contacted via the Sci.Electronics.Repair FAQ (www.repairfaq.org) Email Links Page.
|
<< BJC 600 print head error .. |
Index
| Cleaning Epson inkjet pri.. >>
|
"The error light on the Epson Stylus color IIs keeps blinking. The color
cartridge is new. The black and white prints perfect."
(From: Robert J. Brancatelli (bronco@mkol2.dseg.ti.com).)
Most likely, the new color cartridge is not seating all the way. Move the
print head to where you normally do to swap the heads. Now, without removing
the color print head, lift the most forward lever up as far as it will go,
then bring it down to reseat the ink cartridge.