NotTaR of Television Sets : What is Aquadag?                        
 Copyright © 1994-2007, Samuel M. Goldwasser. All Rights Reserved. Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied: 1. This notice is included in its entirety at the beginning. 2. There is no charge except to cover the costs of copying. I may be contacted via the Sci.Electronics.Repair FAQ (www.repairfaq.org) Email Links Page.

     << Homemade V-chip (or at le.. |  Index  | Combined computer monitor.. >>

What is Aquadag?

You may see the term 'Aquadag' referring the the black paint covering the outside of most of the funnel section of the CRT.

(From: Nicholas Bodley (nbodley@tiac.net).)

Aquadag used to be a trademark of Acheson Colloids [Corp.?], I think around Niagara Falls or Buffalo, NY. It was one of many "-dag" colloidal graphites; they also made Oildag, Gredag (grease), and Alcoholdag, as I recall. Unfortunately, it's probably sold in 55-gallon drums minimum. I hope you can find smaller quantities. Are there any CRT rebuild shops around the USA? See the Thomas Catalog (ThomCat) in a library to find Acheson.

I am pretty sure there's nothing magic about the graphite. If you can find some reasonably-priced nickel-flake or copper-flake paint (be sure it's conductive!), you might have an affordable (?) coating. How about plain metal foil, maybe even ordinary aluminum foil? You surely don't need current-carrying capacity; you would need a decent adhesive, though. How to make sure you have continuity between pieces, I'm not so sure; shoot for really tight crimps that deform the metal and are gas-tight. (This might, however, be quite unnecessary.)